Post by mckenziecz on Mar 25, 2011 16:00:00 GMT
You gonna need heatgun, primer, paint of you choice, screwdriver, masking tape and preferably sealant.
Take of your grill and open you bonnet
take off these clips, two from top and two from bottom, do not lose them
I did
Start heating the sides of the headlight and try to get the screwdriver in there and pull the lens. This might take a while but you will get there. Then take all the bubls out. THis is also a change to wash you lens inside out
Its better to paint the indicator bits separate
Mask the area you dont wanna get painted. obviously
prime then paint
resemble the lights, heat the remaining sealant and ad more if you have some.
done
Thank you.
Copyright © Hampl 2011
Take of your grill and open you bonnet
take off these clips, two from top and two from bottom, do not lose them
I didStart heating the sides of the headlight and try to get the screwdriver in there and pull the lens. This might take a while but you will get there. Then take all the bubls out. THis is also a change to wash you lens inside out
Its better to paint the indicator bits separate
Mask the area you dont wanna get painted. obviously
prime then paint
resemble the lights, heat the remaining sealant and ad more if you have some.
done
Thank you.
Copyright © Hampl 2011
